SWU SERIES - Long Life UPS Batteries with HT X Alloy™
Description
Proven in the real world, the SWU Series of UPS batteries provides security and long life in extremely hot climates where other VRLA batteries just don’t survive. The SWU technology utilizes GS Yuasa Energy Solutions’ proprietary HT X Alloy™ and active material additives. The SWU Series is the most cost-effective battery solution over the total life cycle and for initial installation in your network.
Features
10 Year Design Life - Standby Application
Capacity Range - 200WPC - 750WPC (15 min. rate @ 25°C
Front & Top Terminal Designs - High temperature, long life battery confirgurations for all your equipment applications.
Compliance - UL 1989, IEC 60896-21+22, ISO 9001:2000 factory manufactured, UL 94V-0
HT X Alloy™ extends life in high temp applications
Primary lead for long life
Low calcium alloy for long life
Additives to maintain compression
Designed to control charging current as temperature increases
PYL Series - High Temperature Super Long Life Batteries with HT Element X Alloy™
Description
Proven in the real world, the PYL Series of telecom batteries provides security and long life in extremely hot climates where other VRLA batteries just don’t survive. The PYL technology utilizes GS Battery’s proprietary HT Element X Alloy™ and active material additives. The PYL Series is the most cost effective battery solution over the total life cycle and for initial installation in your network.
Features
10 Year Design Life - Exceeds Telecordia GR-1200 criteria. Greater than 5 years at 35°C.
NP/NPX Series - Sealed Rechargeable Lead-Acid Batteries
Description
Yuasa brand NP and NPX batteries give excellent performance in either float or cyclic applications. These batteries are designed for light duty cyclic applications, fire and security systems, Emergency lighting, solar and wind support systems, UPS systems and toys!
Features
Standby use: Apply constant voltage charging at 2.275 volts per cell (or 2.25–2.30VPC). Cyclic use: Apply constant voltage charging at 2.40–2.50VPC.
Initial charging current should be set at less than 0.25CA.
Storage- 6 months- Top charge: Apply constant voltage at 2.40 volts per cell, initial charging current should be set at less than 0.1CA for 15 to 20 hours. Always store battery in a fully charged condition. If battery is to be stored for a long period, apply a recovery top-charge every 6 months.
Discharge - Stop operation when voltage has reached the minimum permissible voltage. Recharge immediately. Do not operate at 6CA or more current continuously.
Temperature - Keep within ambient temperatures of –15˚C to +50˚C for both charging and discharging. Store batteries in a dry and cool location.
Incorporating battery into equipment - Encase battery in a well ventilated compartment. Avoid installing battery near heated units such as a transformer. House the battery in the lowest section of the equipment enclosure or rack to prevent unnecessary battery temperature rise.
Others - Avoid terminal short circuit. DO NOT expose to open flame. Avoid setting batteries in environments which can cause direct contact to gasoline, paint thinner, organic solvents, or synthetic resins, oil, etc…
NP/NPX Series - Sealed Rechargeable Lead-Acid Batteries
Description
Yuasa brand NP and NPX batteries give excellent performance in either float or cyclic applications. These batteries are designed for light duty cyclic applications, fire and security systems, Emergency lighting, solar and wind support systems, UPS systems and toys!
Features
Standby use: Apply constant voltage charging at 2.275 volts per cell (or 2.25–2.30VPC). Cyclic use: Apply constant voltage charging at 2.40–2.50VPC.
Initial charging current should be set at less than 0.25CA.
Storage- 6 months- Top charge: Apply constant voltage at 2.40 volts per cell, initial charging current should be set at less than 0.1CA for 15 to 20 hours. Always store battery in a fully charged condition. If battery is to be stored for a long period, apply a recovery top-charge every 6 months.
Discharge - Stop operation when voltage has reached the minimum permissible voltage. Recharge immediately. Do not operate at 6CA or more current continuously.
Temperature - Keep within ambient temperatures of –15˚C to +50˚C for both charging and discharging. Store batteries in a dry and cool location.
Incorporating battery into equipment - Encase battery in a well ventilated compartment. Avoid installing battery near heated units such as a transformer. House the battery in the lowest section of the equipment enclosure or rack to prevent unnecessary battery temperature rise.
Others - Avoid terminal short circuit. DO NOT expose to open flame. Avoid setting batteries in environments which can cause direct contact to gasoline, paint thinner, organic solvents, or synthetic resins, oil, etc…
